Inactivation of human coronaviruses using an automated room disinfection device.

The emergence of more virulent and epidemic strains of viruses, especially in the context of COVID-19, makes it more important than ever to improve methods of decontamination. The objective of this study was to evaluate the potential of on-demand production of chlorine species to inactivate human coronaviruses. The commercial prototype disinfection unit was provided by Unipolar Water Technologies. The Unipolar device generates active chlorine species using an electrochemical reaction and dispenses the disinfectant vapour onto surfaces with an aspirator. The minimum effective concentration and exposure time of disinfectant were evaluated on human hepatoma (Huh7) cells using 50% tissue culture infectious dose (TCID50) assay and human coronavirus 229E (HCoV-229E), a surrogate for pathogenic human coronaviruses. We showed that chlorine species generated in the Unipolar device inactivate HCoV-229E on glass surfaces at ≥ 400 parts per million active chlorine concentration with a 5 min exposure time. Here, inactivation refers to the inability of the virus to infect the Huh7 cells. Importantly, no toxic effect was observed on Huh7 cells for any of the active chlorine concentrations and contact times tested.

Insulating Composites Made from Sulfur, Canola Oil, and Wool*.

An insulating composite was made from the sustainable building blocks wool, sulfur, and canola oil. In the first stage of the synthesis, inverse vulcanization was used to make a polysulfide polymer from the canola oil triglyceride and sulfur. This polymerization benefits from complete atom economy. In the second stage, the powdered polymer was mixed with wool, coating the fibers through electrostatic attraction. The polymer and wool mixture were then compressed with mild heating to provoke S-S metathesis in the polymer, which locks the wool in the polymer matrix. The wool fibers imparted tensile strength, insulating properties, and reduced the flammability of the composite. All building blocks are sustainable or derived from waste and the composite is a promising lead on next-generation insulation for energy conservation.

Reactive Compression Molding Post-Inverse Vulcanization: A Method to Assemble, Recycle, and Repurpose Sulfur Polymers and Composites.

Inverse vulcanization provides dynamic and responsive materials made from elemental sulfur and unsaturated cross-linkers. These polymers have been used in a variety of applications such as energy storage, infrared optics, repairable materials, environmental remediation, and precision fertilizers. In spite of these advances, there is a need for methods to recycle and reprocess these polymers. In this study, polymers prepared by inverse vulcanization are shown to undergo reactive compression molding. In this process, the reactive interfaces of sulfur polymers are brought into contact by mechanical compression. Upon heating these molds at relatively low temperatures (≈100 °C), chemical bonding occurs at the polymer interfaces by S-S metathesis. This method of processing is distinct from previous studies on inverse vulcanization because the polymers examined in this study do not form a liquid phase when heated. Neither compression nor heating alone was sufficient to mold these polymers into new architectures, so this is a new concept in the manipulation of sulfur polymers. Additionally, high-level ab initio calculations revealed that the weakest S-S bond in organic polysulfides decreases linearly in strength from a sulfur rank of 2 to 4, but then remains constant at about 100 kJ mol-1 for higher sulfur rank. This is critical information in engineering these polymers for S-S metathesis. Guided by this insight, polymer repair, recycling, and repurposing into new composites was demonstrated.

Synthesis and Applications of Polymers Made by Inverse Vulcanization.

Elemental sulfur is an abundant and inexpensive chemical feedstock, yet it is underused as a starting material in chemical synthesis. Recently, a process coined inverse vulcanization was introduced in which elemental sulfur is converted into polymers by ring-opening polymerization, followed by cross-linking with an unsaturated organic molecule such as a polyene. The resulting materials have high sulfur content (typically 50-90% sulfur by mass) and display a range of interesting properties such as dynamic S-S bonds, redox activity, high refractive indices, mid-wave IR transparency, and heavy metal affinity. These properties have led to a swell of applications of these polymers in repairable materials, energy generation and storage, optical devices, and environmental remediation. This article will discuss the synthesis of polymers by inverse vulcanization and review case studies on their diverse applications. An outlook is also presented to discuss future opportunities and challenges for further advancement of polymers made by inverse vulcanization.

Polysulfides made from re-purposed waste are sustainable materials for removing iron from water.

Water contaminated with Fe3+ is undesirable because it can result in discoloured plumbing fixtures, clogging, and a poor taste and aesthetic profile for drinking water. At high levels, Fe3+ can also promote the growth of unwanted bacteria, so environmental agencies and water authorities typically regulate the amount of Fe3+ in municipal water and wastewater. Here, polysulfide sorbents-prepared from elemental sulfur and unsaturated cooking oils-are used to remove Fe3+ contaminants from water. The sorbent is low-cost and sustainable, as it can be prepared entirely from waste. The preparation of this material using microwave heating and its application in iron capture are two important advances in the growing field of sulfur polymers.